ferezone.blogg.se

1. #CANON MX430 SERIES PRINTER WS VS CANON MX430 SERIES PRINTER HOW TO#
2. #CANON MX430 SERIES PRINTER WS VS CANON MX430 SERIES PRINTER INSTALL#

When performing Automatic Print Head Alignment: If you have moved the Front Tray during printing, return the Front Tray to the correct position, then press the RESUME/CANCEL button on the printer and try printing again.ĭo not move the Front Tray during printing.Īutomatic Print Head alignment failed./The Page Size setting does not match the size of the paper loaded in the printer.

#CANON MX430 SERIES PRINTER WS VS CANON MX430 SERIES PRINTER HOW TO#

Refer to Loading Paper for details about how to return the Front Tray to its normal printing position. When printing from the Rear Tray, return the Front Tray to its normal printing position, make sure that paper is loaded in the Rear Tray, then press the RESUME/CANCEL button on the printer to resume printing. The Front Tray is not set to its correct position./The Front Tray was moved during printing. If the error is still not resolved, check if you can print another photograph. Perform necessary operations before connecting your device referring to its instruction manual. You may also have to turn on your device or select Play mode manually after connecting the device to the printer. When printing from a PictBridge compliant device, depending on the model or brand of your device, you may have to select a PictBridge compliant print mode on the device before connecting it to the printer. In such cases, disconnect and reconnect the USB cable. Printing photos directly is possible only with a PictBridge compliant device.Ī communication time out occurs if an operation takes too long or if it takes too much time to send data.

The printer has not received a response from the digital camera./The digital camera or digital video camcorder connected is not compatible with this printer.Ĭheck the device connected to the printer. Press the printer's RESUME/CANCEL button to continue printing. (The lamps on the ink tanks flash.)Ĭonfirm that the ink tanks are installed in the appropriate positions.

More than one ink tanks of the same color are installed. Some ink tanks are not installed in the correct position. Ink tank is not installed in the correct position. If the Inner Cover is open when starting printing on paper, close the Inner Cover, then press the RESUME/CANCEL button on the printer. If the error is still not resolved, the Print Head may be damaged. If the Print Head is already installed, remove the Print Head once and then reinstall it.

#CANON MX430 SERIES PRINTER WS VS CANON MX430 SERIES PRINTER INSTALL#

Print Head is not installed./Print Head is defective.įollow the directions given in your setup manual to install the Print Head. The printer may be damaged if printing is continued under the ink out condition. Replace the empty ink tank immediately after the printing. Then printing can continue under the ink out condition. If printing is in progress and you want to continue printing, press the RESUME/CANCEL button with the ink tank installed. If the lamp on the ink tank is flashing, ink may have run out.Ĭlose the Top Cover after ink tank replacement to resume printing. Install an appropriate canon ink cartridge. If the lamp on the ink tank is not lit, the ink tank may not be installed properly. Ink tank is not installed properly./Ink may have run out. Remove the jammed paper, reload paper in the printer, and then press the RESUME/CANCEL button. If the error still remains when the Front Tray or the Front Feed Support is opened, paper may be jammed. If the Front Feed Support is closed when printing from the Front Tray, open it and press the RESUME/CANCEL button on the printer. Reload photo paper to the Rear Tray and press the RESUME/CANCEL button.įront Tray or Front Feed Support is closed./Paper jams. When the Power lamp flashes blue even though the printer is not in use, the printer is shaking the ink tanks. Load the paper correctly in the Front Tray and press the RESUME/CANCEL button on the printer. The printer is not ready to feed paper from the Front Tray yet. No support is available on this topic from us other than the below. THIS WEBSITE IS NOT CANON - It is an informational page provided by Red River Paper.